In 2x6 wood framing how many nails should the wall studs have to fasten to the plates when toe nailed?

I would probably use 5 - 6 nails when toe-nailing. another option for added strength would be to cut ';scrap stud board'; (2X6) to fit the 16 inch gap (meaning cut them to fit snugly between the every other stud). Lay these on the floor and/or at the top of the wall and nail the studs into these. Allows straight nailing, and gives the stud something to attach. Far stronger - placing in every other gap allows you to nail two studs into the same board (each end). Use only if you can spare the scrap wood. I've even used short pieces and nailed only one stud to it. Good luckIn 2x6 wood framing how many nails should the wall studs have to fasten to the plates when toe nailed?
To toe nail a 2x6 there should be two 10d minimum nails per side, for a total of four toe nails. I prefer to use 16d nails though.In 2x6 wood framing how many nails should the wall studs have to fasten to the plates when toe nailed?
4 nails 2 each side
Usually 3 nails per end will be sufficiant, Some framers use 5...3 on one side of the stud and two on the other.( if you use 5, put two of them on the same side). Hope this answers your question..